Mould prep 60ml
The best thing for molds. A microfine coating of the molds ensures the ultimate care of the molds. No oiling or degreasing anymore. Super clean bullets dissolve very easily from the mold. No annoying application of lead spray or lead residue on the mold. Instructions for use: Mold Prep is graphite dissolved in a carrier liquid. For the coating, disassemble the mold into the individual parts and clean thoroughly with a degreaser (alcohol / acetone). Dry the parts and apply Mold Prep with a fine brush. The carrier liquid evaporates very quickly leaving behind a micro-coating of graphite, which prevents the application of lead splash or streaking under the cutter and causes easy release of the bullet from the mold. The micro-coating is so thin that it does not add the vent grooves of the mold. This dry lubrication saves the time-consuming oiling and de-oiling of the mold after and before casting. Mold prep can also be used to coat the mechanical parts of powder filling machines. The coating ensures a smooth passage of the powder and is the best protection against static charge. Shake vigorously for about 1 minute before use!